Teltonika TSW202 PoE+ managed Ethernet Switch

  • 1 595,-
Lagerbalanse: 4 stk.
Artikkelnummer: tn-tsw202
EAN: 4779051840281
Se mer informasjon
Del
NB: Strømadapter følger IKKE med!
Switchen kan forsynes med 7 - 57 VDC på klemmer. For tilkobling av PoE-utstyr på portene så kreves minimum 44 VDC. Teltonika EU 2-PIN Power Supply, 250W kan benyttes.


TSW202 is the first-ever Teltonika Networks managed PoE+ Ethernet switch, designed to provide granular network management capabilities while centralizing power distribution. This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each.

Flyer | Datasheet


PACKAGE CONTAINS

  • TSW202
  • QSG (Quick Start Guide)
  • Packaging box

FEATURES

ETHERNET
ETHMulti-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover
Fibre2 x SFP ports
IEEE 802.3 series standards802.3i, 802.3u, 802.3ab, 802.3x

POE OUT
PoE portsPort 1 - 8
PoE standards802.3af and 802.3at Alternative B
PoE Max Power per Port (at PSE)30 W
Total PoE Power Budget (at PSE)240 W
Maximum Ethernet cable length100 m

SERVICES
EtherNet/IPYes
Profinet (class B)Yes
SNMP V2, V3Yes
LLDPYes

NETWORK
MRPMRP client role, MRP manager role
L2 featuresLoop protection, Forwarding table, VLAN, STP/RSTP
DHCPDHCP server, DHCP client
Port SettingsEnable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring
L3 FeaturesStatic IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address

QOS
QOS<Port priority, DSCP priority, 802.1p priority, TOS
Scheduling methodSP/WFQ/WRR
Bandwidth controlRate limiting, storm control
Traffic ShaperPort-based shaping

DIAGNOSTICS
ToolsCable diagnostic, ping, traceroute, nslookup

SYSTEM CHARACTERISTICS
RAM128MB, DDR3
FLASH storage16 MB serial flash

FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration

FIRMWARE CUSTOMISATION
Operating systemTSWOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided

PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)20 Gbps
Forwarding rate14.88 Mpps
Packet buffer512 KB
MAC address table size8K entries
Jumbo frame support10000 bytes

POWER
Connector2-pin industrial DC power socket
Input voltage range7 – 57 VDC
PoE-out input voltage range44 – 57 VDC
Power consumptionIdle: < 3 W / Max: 8 W / PoE Max: 248 W

PHYSICAL INTERFACES
Ethernet8 x RJ45 ports, 10/100/1000 Mbps
Fibre2 x SFP ports
Status LEDs1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs
Power1 x 2-pin industrial DC power socket
ResetSoftware reset button
Other1 x Grounding screw

PHYSICAL SPECIFICATION
Casing materialAnodized aluminum housing and panels
Dimensions (W x H x D)132 x 44.2 x 122.2 mm
Weight610 g
Mounting optionsIntegrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement

OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30

REGULATORY & TYPE APPROVALS
RegulatoryCE, UKCA, RCM, ANRT, FCC, IC, CB, RoHS, REACH

EMC EMISSIONS & IMMUNITY
StandardsEN 55032:2015 + A11:2020 + A1:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2: 2019 + A1:2021
EN 61000-3-3: 2013 + A1:2019 + A2:2021
ESDEN 61000-4-2:2009
Radiated ImmunityEN IEC 61000-4-3:2020
EFTEN 61000-4-4:2012
Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014 + A1:2017
CSEN 61000-4-6:2014
DIPEN 61000-4-11:2020

SAFETY
StandardsCE: EN IEC 62368-1:2020 + A11:2020
RCM: AS/NZS 62368.1:2022
CB: IEC 62368-1:2018